You are here: Home | Low Friction Track | Conveyor Systems | Page 8
Our 2 or 4 wheel trolleys for power chain driven systems are suitable for hanging loads, for production lines which are electrically operated and for transporting products.
NIKO Profile No.
23.000
24.000
25.000
No.
23.T05
23.T06
24.T05
24.T06
25.T06
SWL Kg
20
40
40
80
200
Dimension L (mm)
40
80
40
100
120
Dimension b (mm)
40
48.5
65
Dimension h (mm)
35
43.5
60
Dimension h1 (mm)
40
49
49.5
Dimension h2 (mm)
8
89.5
89.5
Dimension e (mm)
10
10
10
Dimension d (mm)
ø8.2
ø8.2
ø8.2
The NIKO chain driven system is a cost effective and reliable solution where powered motion is necessary. It provides ideal solutions in painting lines, packaing lines, assembly lines and general type production lines. It is available in three main track profiles that can accommodate loads from 10 kg to 200 kg per chain driven trolley. An inverter can be adopted to the system in order to achieve an adjustable motion and speed control. Finally it can also be used in combination with the rest of NIKO manual overhead conveyor systems (all track profiles) in order to power drive a specific section of the system.
Chain Driven Systems Parallel Load Driven Systems

LEGEND

No. 1 DRIVING CHAIN WHEEL D = 316mm No. X2.801
No. 2 FREE CHAIN WHEEL D = 316mm No. X3.800
No. 3 CHAIN TENSION SYSTEM D = 316mm No. X3.822
Base for Driving Chain Wheel Base for Free Chain Wheel
Chain Tension System